01706 889 356
The new Tecpro LS361 is a single circuit, wall mounting Loudspeaker Station featuring a carefully selected 80mm loudspeaker, and a flush mounted electret microphone. Construction is based around a rigid aluminium extrusion with a profile suitable for surface mounting the station to a wall. Screw slots are provided in the rear for convenience. The microphone, loudspeaker and associated controls are mounted on a machined top plate.
The LS361 Loudspeaker Station is designed to provide local monitoring of a single intercom circuit without the need to wear headphones. The built-in microphone allows full duplex (simultaneous talk and listen) conversations to take place. Feedback cancellation circuitry helps avoid acoustic howl-round when speaker and microphone are operating together. To further reduce feedback, a gooseneck microphone (which allows the operator to speak closer to the mic capsule) may be plugged in, disabling the internal microphone. If required, a headset may be plugged in, disabling both the internal microphone and speaker.
Pressing the 'Call' button causes 'Call Alert' lights on other Tecpro user stations to flash to attract the attention of operators who may have momentarily removed their beltpack and headset.
Pressing the 'Speaker Mute' button silences the loudspeaker output. To prevent important announcements accidentally going unheard when muted, the LS351 Loudspeaker Station will automatically restore audio levels to a pre-determined volume when an 'Override' control signal is generated elsewhere on the intercom circuit. The 'Override' loudspeaker volume is adjusted via a preset and can be set anywhere between zero and full volume.
The LS361 Loudspeaker Station can both detect and generate 'Remote Mic Kill' tone. If tone is detected and the microphone is active, it will be automatically switched off to help control the build up of unnecessary noise and chatter..
Pressing the 'Speaker Mute' button silences the loudspeaker output. To prevent important announcements going unheard when muted, the LS361 Loudspeaker Station will automatically restore audio levels to a pre-set volume when an 'Override' control signal is generated elsewhere on the intercom circuit. The 'Override' loudspeaker volume can be set anywhere between zero and full volume.
Cable entry is through a cut-out on the rear of the aluminium case and termination is via an internal junction block.
The LS361 derives its power directly from the 24V DC Tecpro line. A green LED indicates power is present.
A template is provided to aid fitting.
SKU: 1153
