01706 889 356
Overview:
Further expanding the Titan range, the Zoom Wash T1 is an IP65 rated fixture with a lightweight, compact, durable housing specifically designed for wet, dusty, and sandy conditions. Designed for both rental and installation applications, the fixture is equipped with 7 x 40W RGBL LEDs along with super-fast and quiet motors for precision movements. When used at its narrowest 3.5 degree beam angle, sharp mid-air effects can be created whilst at its widest 44 degrees wide washes can bathe venues and stages in rich colours. The addition of lime in the LEDs produces a high CRI of 85Ra, and the central LED can be controlled separately to the outer LEDs, whilst an the RGB halo produces a range of eye-candy effects. The Titan Zoom Wash T1 has an adjustable refresh rate perfect for TV and film, it also features 3 selectable fan speeds including a studio mode with a 32.7dB noise level for noise sensitive applications. A range of preset colour macros, ring programs along with colour temperature presets further bolsters this fixtures offering.
Features:
- 2 year warranty
- 7 x 40W quad-colour LEDs (RGBL)
- 46 x tri-colour 3535 SMD LEDs (RGB)
- Adjustable beam angle: 3.5°- 45°
- 3.5° - 82,723 Lux @ 2m (full on), 45° - 2,040 Lux @ 2m (full on)
- CRI: >85Ra
- Refresh rate: 5 selectable presets between 12kHz-25kHz
- Motorised zoom
- Pixel zone mapping
- DMX channels: 9/13/14/20/28/32 or 37 selectable
- Wireless control (W-DMX Sweden transceiver)
- Auto, manual control and master/slave modes
- Built-in colour macros and patterns
- Colour temperature presets
- Pan/tilt auto correction
- 16-Bit pan/tilt positioning
- Pan: 540°, Tilt: 220°
- 0 - 100% dimming
- 4 dimming curves: Linear, square law, inverse square law and S-curve
- Variable strobe
- PowerTwist TR1 input/output
- 5-Pin XLR input/output
- 3-Pin XLR input/output
- RDM (Remote Device Management)
- 4 button menu with 2.4” TFT display
- Display battery backup for offline configuration
- Supplied with quick release omega clamps
- Square hole spacing on omega clamp receivers allows for clamps to be mounted in all orientations
- USB-C port (firmware updates)
- 3 selectable fan modes (live, power and studio)
